Difficulty

Moderate

Steps

7

Time Required

                          5 - 15 minutes

Sections

3

  • Battery
  • 3 steps
  • Back Panel
  • 3 steps
  • RAM
  • 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackToshiba Satellite S55t-C5225

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Shut down the computer and disconnect all cables
  • Flip the computer over so the bottom is facing up.

Shut down the computer and disconnect all cables

Flip the computer over so the bottom is facing up.

1024

Step 2

  • Remove the two 7.0 mm Phillips #0 screws that hold the battery in place.

Remove the two 7.0 mm Phillips #0 screws that hold the battery in place.

Step 3

  • Carefully remove the battery by wedging a plastic opening tool in-between the battery and back cover.

Carefully remove the battery by wedging a plastic opening tool in-between the battery and back cover.

Step 4

              Back Panel
  • Remove the eleven 7.0 mm Phillips #0 screws that secure the back cover.

Remove the eleven 7.0 mm Phillips #0 screws that secure the back cover.

Step 5

  • Wedge the tip of a plastic opening tool between the back cover and metal frame.
  • Twist the plastic tool, while wedged, to release the retaining tabs from the frame.
  • Repeat these steps around the laptop to release all retaining tabs.

Wedge the tip of a plastic opening tool between the back cover and metal frame.

Twist the plastic tool, while wedged, to release the retaining tabs from the frame.

Repeat these steps around the laptop to release all retaining tabs.

Step 6

  • Once all retaining tabs are released, pull up on the cover to remove.

Once all retaining tabs are released, pull up on the cover to remove.

Step 7

              RAM
  • Press on the metals clips on the outside of the RAM to release it.
  • Gently pull out the first RAM stick. Repeat the process for the other RAM stick.

Press on the metals clips on the outside of the RAM to release it.

Gently pull out the first RAM stick. Repeat the process for the other RAM stick.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Javien Delgado

Member since: 10/21/2019

217 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S1-G5, Botvin Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G5, Botvin Fall 2019 



                    UMASSD-BOTVIN-F19S1G5                     


                                            3 Members                     


                                            11 Guides authored