Difficulty

Moderate

Steps

7

Time Required

                          30 minutes

Sections

1

  • Display
  • 7 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackToshiba Satellite U405D-S2902

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Display
  • Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.

Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.

1024

Step 2

  • Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.

Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.

Step 3

  • Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop.
  • Carefully pull the top away from the back.

Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop.

Carefully pull the top away from the back.

Step 4

  • Turn the laptop around.
  • Remove the webcam/microphone data cable.

Turn the laptop around.

Remove the webcam/microphone data cable.

Step 5

  • Remove the lower lighting power supply.
  • Remove the signal light power supply and data cable.

Remove the lower lighting power supply.

Remove the signal light power supply and data cable.

Step 6

  • Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display.
  • After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.

Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display.

After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.

Step 7

  • Carefully remove the screen from the side brackets.
  • Remove the LCD ribbon connector from the display.

Carefully remove the screen from the side brackets.

Remove the LCD ribbon connector from the display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 7 other contributors 


                    Brandon Kirklen

Member since: 01/11/2013

311 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 7-8, Maness Winter 2013                        

                                                  Member of Cal Poly, Team 7-8, Maness Winter 2013 



                    CPSU-MANESS-W13S7G8                     


                                            4 Members                     


                                            8 Guides authored