Difficulty

Easy

Steps

11

Time Required

                          10 minutes

Sections

3

  • Top Panel
  • 3 steps
  • Front Panel
  • 3 steps
  • Disc Drive
  • 5 steps

Flags

0

  • BackToshiba SD-K740

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Panel
  • Unplug the DVD player before beginning.
  • Remove the three 7.7 mm screws from the back panel using a Phillips #0 screwdriver.

Unplug the DVD player before beginning.

Remove the three 7.7 mm screws from the back panel using a Phillips #0 screwdriver.

1024

Step 2

  • Turn the DVD player on its side.
  • Remove the 7.7 mm screw.
  • Flip the DVD player onto its other side.
  • Remove the 7.7 mm screw.

Turn the DVD player on its side.

Remove the 7.7 mm screw.

Flip the DVD player onto its other side.

Step 3

  • Flip the DVD player over onto its front face.
  • Remove the back panel by lifting up and pulling it towards yourself.

Flip the DVD player over onto its front face.

Remove the back panel by lifting up and pulling it towards yourself.

Step 4

              Front Panel
  • Flip the DVD player so its top is sitting on your working surface.
  • Lift and push away the two tabs located in the middle of the player.
  • The front panel will not detach during this step, so do not force it.

Flip the DVD player so its top is sitting on your working surface.

Lift and push away the two tabs located in the middle of the player.

The front panel will not detach during this step, so do not force it.

Step 5

  • Flip the DVD player on its side.
  • Lift and slide forward the single tab on the side.
  • The front panel will not detach during this step, so do not force it.

Flip the DVD player on its side.

Lift and slide forward the single tab on the side.

Step 6

  • Grasp the front panel and pull forward to your right to remove it.

Grasp the front panel and pull forward to your right to remove it.

Step 7

              Disc Drive
  • Remove the first of three ribbon cables on left hand side of disc drive by pulling vertically.

Remove the first of three ribbon cables on left hand side of disc drive by pulling vertically.

Step 8

  • Remove the second of three ribbon cables on left hand side of disc drive by pulling vertically.

Remove the second of three ribbon cables on left hand side of disc drive by pulling vertically.

Step 9

  • Remove the third of three ribbon cables on left hand side of disc drive by pulling vertically.

Remove the third of three ribbon cables on left hand side of disc drive by pulling vertically.

Step 10

  • Remove the four screws holding the disc drive in place using a #0 Phillips screwdriver.

Remove the four screws holding the disc drive in place using a #0 Phillips screwdriver.

Step 11

  • Lift disc drive vertically to remove.

Lift disc drive vertically to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Joe Murphy

Member since: 01/20/2011

542 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 1-16, Amido Winter 2011                        

                                                  Member of Cal Poly, Team 1-16, Amido Winter 2011 



                    CPSU-AMIDO-W11S1G16                     


                                            4 Members                     


                                            8 Guides authored