Difficulty

Easy

Steps

8

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 4 steps
  • Midframe
  • 4 steps

Flags

0

  • BackToshiba Thrive

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Make sure the lock switch for the back cover is unlocked.
  • The cover is unlocked when the switch is slid in the direction of the ‘unlock’ icon.

Make sure the lock switch for the back cover is unlocked.

The cover is unlocked when the switch is slid in the direction of the ‘unlock’ icon.

1024

Step 2

  • Remove back cover by prying away from the Thrive.
  • The easiest place to pry from is one of the two speakers.

Remove back cover by prying away from the Thrive.

The easiest place to pry from is one of the two speakers.

Step 3

  • To remove the battery, make sure the lock switch is in the unlocked position.
  • The battery is unlocked when the switch is slid to the unlocked position.

To remove the battery, make sure the lock switch is in the unlocked position.

The battery is unlocked when the switch is slid to the unlocked position.

Step 4

  • Slide the battery switch release to the right.
  • While holding the switch in place, lift up the battery.

Slide the battery switch release to the right.

While holding the switch in place, lift up the battery.

Step 5

              Midframe
  • Start by using a screwdriver to remove the 12 screws holding on the back cover. The screws are 5mm in length and require a PH0 screwdriver.
  • All of these screws are identical so don’t worry about getting them mixed up.

Start by using a screwdriver to remove the 12 screws holding on the back cover. The screws are 5mm in length and require a PH0 screwdriver.

All of these screws are identical so don’t worry about getting them mixed up.

Step 6

  • Start to gently pry the back of the device off, while leaving it loosely in place.
  • Be careful not to tear or damage the cables when removing the back.

Start to gently pry the back of the device off, while leaving it loosely in place.

Be careful not to tear or damage the cables when removing the back.

Step 7

  • Once the back of the case is off, disconnect the wires by gently pulling on the plastic tabs as shown.

Once the back of the case is off, disconnect the wires by gently pulling on the plastic tabs as shown.

Step 8

  • Carefully open the device like a book and lay the two halves beside each other.

Carefully open the device like a book and lay the two halves beside each other.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Kason

Member since: 09/22/2014

1,120 Reputation

                                      5 Guides authored                  



                       Badges:
                       18







                                                        +15 more badges

Team

                       USF Tampa, Team 10-1, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 10-1, Brown Fall 2014 



                    USFT-BROWN-F14S10G1                     


                                            3 Members                     


                                            12 Guides authored