Difficulty
Easy
Steps
8
Time Required
10 minutes
Sections
2
- Back Panel
- 5 steps
- Volume Buttons
- 3 steps
Flags
0
BackTrio Stealth G4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The disassembly is very simple. You will need only basic tools and will not be required to perform any specialized tasks.
What you need
Step 1
Back Panel
- Working on your device while it is turned on may result in electric shock. Be sure to shut down and unplug your device before you begin.
- Flip your tablet over so that the back panel is facing up.
Working on your device while it is turned on may result in electric shock. Be sure to shut down and unplug your device before you begin.
Flip your tablet over so that the back panel is facing up.
1024
Step 2
- Use a plastic opening tool to gently pry the back panel assembly apart from the front casing.
- Start on one edge of the device by inserting the plastic opening tool between the back panel and the front casing using a gentle rocking motion.
Use a plastic opening tool to gently pry the back panel assembly apart from the front casing.
Start on one edge of the device by inserting the plastic opening tool between the back panel and the front casing using a gentle rocking motion.
Step 3
- Once you have successfully separated one edge of the back panel from the front casing, slide the plastic opening tool along the other edges to detach them as well.
- The latches keeping the back panel attached to the front casing can sometimes be a little difficult to separate, so don’t be afraid to use some force.
Once you have successfully separated one edge of the back panel from the front casing, slide the plastic opening tool along the other edges to detach them as well.
The latches keeping the back panel attached to the front casing can sometimes be a little difficult to separate, so don’t be afraid to use some force.
Step 4
- Remove the back panel from the rest of the tablet and set it aside.
Remove the back panel from the rest of the tablet and set it aside.
Step 5
- The plastic volume button cover may fall out when you remove the back panel. Set it aside.
The plastic volume button cover may fall out when you remove the back panel. Set it aside.
Step 6
Volume Buttons
- Remove the yellow tape covering the set of wires located near the upper right corner of the battery.
Remove the yellow tape covering the set of wires located near the upper right corner of the battery.
Step 7
- Wedge a spudger underneath the black flap on the zero insertion force (ZIF) connector and flip it up.
- Once the flap is up, use your fingers to disconnect the end of the ribbon wire from the connector.
Wedge a spudger underneath the black flap on the zero insertion force (ZIF) connector and flip it up.
Once the flap is up, use your fingers to disconnect the end of the ribbon wire from the connector.
Step 8
- Use your fingers to carefully peel the volume sensors away from the top of the plastic L-shaped speaker housing.
Use your fingers to carefully peel the volume sensors away from the top of the plastic L-shaped speaker housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Matt Arnold
Member since: 09/22/2015
607 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Baylor, Team 4-1, Williams Fall 2015
Member of Baylor, Team 4-1, Williams Fall 2015
BU-WILLIAMS-F15S4G1
4 Members
10 Guides authored
