Uniden Utab71 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Battery
4 steps

Flags

BackUniden UTAB71
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Use a plastic opening tool to undo the clips that attach the two halves of the tablet.
Be gentle with the pry tool and work your way around the edges of the tablet slowly.
Make sure the tablet is powered off before prying open.
There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

Use a plastic opening tool to undo the clips that attach the two halves of the tablet.

Be gentle with the pry tool and work your way around the edges of the tablet slowly.

Make sure the tablet is powered off before prying open.

There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

1024

Step 2

Lift off the tape that holds the speaker wires to the battery
Leave the tape off to the side

Lift off the tape that holds the speaker wires to the battery

Leave the tape off to the side

Step 3

Use a soldering tool to disconnect the two wires (red and black) that connect the battery to the motherboard
Note the placement of each colored wire in the motherboard
If you have no experience in soldering, please follow this guide

Use a soldering tool to disconnect the two wires (red and black) that connect the battery to the motherboard

Note the placement of each colored wire in the motherboard

If you have no experience in soldering, please follow this guide

Step 4

Use a credit card to lift the battery off the back of the tablet
Do not put any pressure on the motherboard or any other internal components.
The battery attached to the back panel with adhesive. You may need to use a heated iOpener to loosen the adhesive and remove the battery.

Use a credit card to lift the battery off the back of the tablet

Do not put any pressure on the motherboard or any other internal components.

The battery attached to the back panel with adhesive. You may need to use a heated iOpener to loosen the adhesive and remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Ryan Jewell

Member since: 10/20/2016

422 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team 5-4, Martin Fall 2016                        

                                                  Member of UMass Dartmouth, Team 5-4, Martin Fall 2016 



                    UMASSD-MARTIN-F16S5G4                     


                                            3 Members                     


                                            8 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team