Difficulty

Moderate

Steps

9

Time Required

                          5 - 15 minutes

Sections

2

  • Unnecto Drone M Disassembly
  • 8 steps
  • Earpiece Speaker
  • 1 step

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackUnnecto Drone M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Unnecto Drone M Disassembly
  • Place the phone facedown on a cleared work area
  • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

Place the phone facedown on a cleared work area

Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

1024

Step 2

  • Grip the top right corner of the battery.
  • Remove the battery by pulling it outwards.

Grip the top right corner of the battery.

Remove the battery by pulling it outwards.

Step 3

  • Remove the four screws on the back of the phone using a Philips 000 screwdriver

Remove the four screws on the back of the phone using a Philips 000 screwdriver

Step 4

  • Separate the frame evenly using a plastic opening tool.
  • Be careful, as the frame is thin and can break easily.

Separate the frame evenly using a plastic opening tool.

Be careful, as the frame is thin and can break easily.

Step 5

  • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

Step 6

  • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

Step 7

  • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.
  • The white circuit is flimsy and securely glued to the frame.

Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

The white circuit is flimsy and securely glued to the frame.

Step 8

  • Set aside the circuit board from the screen protector.

Set aside the circuit board from the screen protector.

Step 9

              Earpiece Speaker
  • Peel back the speaker using fine-tipped tweezers
  • Use caution when removing the earpiece speaker

Peel back the speaker using fine-tipped tweezers

Use caution when removing the earpiece speaker

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Esteban Almeida

Member since: 02/08/2018

329 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       University of North Texas, Team S6-G4, Thomas Spring 2018                        

                                                  Member of University of North Texas, Team S6-G4, Thomas Spring 2018 



                    UNT-THOMAS-S18S6G4                     


                                            4 Members                     


                                            10 Guides authored