Difficulty
Moderate
Steps
7
Time Required
20 minutes
Sections
1
- Brush Roll
- 7 steps
Flags
0
BackVacuum Cleaner
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
*Exact part locations and the number of screws may vary according to the device model.
What you need
Step 1
Brush Roll
- Be sure to unplug the device from the wall outlet before disassembling.
- Remove the bottom head of the vacuum cleaner by pressing the push button.
Be sure to unplug the device from the wall outlet before disassembling.
Remove the bottom head of the vacuum cleaner by pressing the push button.
1024
Step 2
- Carefully unscrew the 6 screws with a Phillips screwdriver. Set aside.
Carefully unscrew the 6 screws with a Phillips screwdriver. Set aside.
Step 3
- Separate the top portion of the head from the bottom.
- Make sure not to pull off or damage the connected wires.
Separate the top portion of the head from the bottom.
Make sure not to pull off or damage the connected wires.
Step 4
- Slip off the belt.
Slip off the belt.
Step 5
- Pull the brush roll from its slots.
Pull the brush roll from its slots.
Step 6
- Use scissors to cut strings and other debris from the brush roll. Avoid cutting the bristles.
Use scissors to cut strings and other debris from the brush roll. Avoid cutting the bristles.
Step 7
- Return the clean brush roll and re-situate the belt to secure it in place.
Return the clean brush roll and re-situate the belt to secure it in place.
To reassemble your device, follow the disassembly instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Kaitlyn Sheets
Member since: 01/19/2016
117 Reputation
1 Guide authored
Badges:
2
Team
Oakland University, Team 6-12, Walwema Winter 2016
Member of Oakland University, Team 6-12, Walwema Winter 2016
OAK-WALWEMA-W16S6G12
1 Member
1 Guide authored
