Difficulty

Moderate

Steps

6

Time Required

                          1 hour

Sections

1

  • Mudguards
  • 6 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackVanMoof No 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The most time consuming step is to buy the mudguards. This sounds easy except

  • Vanmoof don’t list the mudguards. Email Vanmoof support and they’ll create a special sales link. You need to buy the M2/M3 mudguards which can be made to fit.They only ship to certain countries (why, it’s just postage?). It took 6 months to pick mine up !!

Step 1

              Get the Mudguards
  • Make sure you get 2 mudguards, one set of stays that are straight for the rear, and a second that have a bend. Also make sure you have the two rear connection pieces.

Make sure you get 2 mudguards, one set of stays that are straight for the rear, and a second that have a bend. Also make sure you have the two rear connection pieces.

1024

Step 2

              The problem
  • You need to cut both sides of the mudguard so it can fit between the chain stays, and drill a new hole to attach to the bottom of the frame.

You need to cut both sides of the mudguard so it can fit between the chain stays, and drill a new hole to attach to the bottom of the frame.

Step 3

              Cut the rear mudguard
  • The rear mudguard will need to be cut at the front.
  • First cut at parallel to the bottom about 16mm long
  • Second cut is 7mm in from the rounded edge

The rear mudguard will need to be cut at the front.

First cut at parallel to the bottom about 16mm long

Second cut is 7mm in from the rounded edge

Step 4

              Bend over the metal to make the edge
  • Bend the edges over so you make a rounded lip

Bend the edges over so you make a rounded lip

Step 5

              Drill the new hole
  • Drill the frame attachment hole

Drill the frame attachment hole

Step 6

              Fit the rear mudguard
  • Bolt to the frame

Bolt to the frame

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Martin Hampton

Member since: 02/13/2016

1,202 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges