Difficulty

Moderate

Steps

3

Time Required

                          25 minutes

Sections

1

  • Camera
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackVelocity Micro Cruz T410

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the Back
  • Using one of the plastic opening tools, separate the plastic back from the tablet in one spot.
  • Gently work the tool around the diameter of the tablet until the back pops completely off.

Using one of the plastic opening tools, separate the plastic back from the tablet in one spot.

Gently work the tool around the diameter of the tablet until the back pops completely off.

1024

Step 2

              Accessing the Camera
  • Locate the camera as illustrated. Remove the 3 black screws at the top of the tablet.
  • Gently pull back the yellow piece so that the camera may be accessed.

Locate the camera as illustrated. Remove the 3 black screws at the top of the tablet.

Gently pull back the yellow piece so that the camera may be accessed.

Step 3

              Remove the Camera
  • Use the tweezers to pull back the black latch on the motherboard that holds the camera.
  • Finally, use the tweezers to remove the camera from the motherboard.

Use the tweezers to pull back the black latch on the motherboard that holds the camera.

Finally, use the tweezers to remove the camera from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    T Smith

Member since: 11/02/2016

205 Reputation

                                      2 Guides authored                  



                       Badges:
                       2