Difficulty

Moderate

Steps

13

Time Required

                          15 minutes

Sections

1

  • Motherboard
  • 13 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackVelocity Micro Cruz T301

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Insert the plastic opening tool in the SD port. The edge point should be pointed towards the rear panel.

Insert the plastic opening tool in the SD port. The edge point should be pointed towards the rear panel.

1024

Step 2

  • Insert a small opening tool between the rear panel and the tablet.

Insert a small opening tool between the rear panel and the tablet.

Step 3

  • The large opening tool is not needed any more.

The large opening tool is not needed any more.

Step 4

  • Move the small tool opener around the rear panel to free the 12 edges.

Move the small tool opener around the rear panel to free the 12 edges.

Step 5

  • Using PH0 Phillips Driver, remove the 4 Screws in the Metal part.

Using PH0 Phillips Driver, remove the 4 Screws in the Metal part.

Step 6

  • Using a plastic Spudger remove the battery connector.

Using a plastic Spudger remove the battery connector.

Step 7

  • Using PH0 Phillips Driver, remove the 12 Screws in the cover.

Using PH0 Phillips Driver, remove the 12 Screws in the cover.

Step 8

  • Place a metal Spudger between the tablet and the back cover.

Place a metal Spudger between the tablet and the back cover.

Step 9

  • Move the spudger around the tablet to release the clips attached to the tablet.

Move the spudger around the tablet to release the clips attached to the tablet.

Step 10

  • Use a plastic spudger to release the connection between the speakers and the motherboard as shown in the picture.

Use a plastic spudger to release the connection between the speakers and the motherboard as shown in the picture.

Step 11

  • This guide shows the use of incorrect tools. Always use ESD safe tools when dealing with delicate internal components.
  • Use a nylon spudger to remove the top plug connector from the motherboard.

This guide shows the use of incorrect tools. Always use ESD safe tools when dealing with delicate internal components.

Use a nylon spudger to remove the top plug connector from the motherboard.

Step 12

  • Use a metal spudger to remove both screen cable connectors

Use a metal spudger to remove both screen cable connectors

Step 13

  • use openning tools to remove the motherboard.

use openning tools to remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Ahmed

Member since: 10/05/2016

227 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 1-6, Cagle Fall 2016                        

                                                  Member of USF Tampa, Team 1-6, Cagle Fall 2016 



                    USFT-CAGLE-F16S1G6                     


                                            3 Members                     


                                            5 Guides authored