Difficulty

Moderate

Steps

14

Time Required

                          15 minutes

Sections

1

  • Screen Display.
  • 14 steps

Flags

5

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • Backvelocity micro tablet T301

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen Display.
  • Insert the plastic opening tool in the SD port. The edge point should be pointed towards the rear panel.

Insert the plastic opening tool in the SD port. The edge point should be pointed towards the rear panel.

1024

Step 2

  • Insert a small opening tool between the rear panel and the tablet.

Insert a small opening tool between the rear panel and the tablet.

Step 3

  • The large opening tool is not needed any more.

The large opening tool is not needed any more.

Step 4

  • Move the small tool opener around the rear panel to free the 12 edges.

Move the small tool opener around the rear panel to free the 12 edges.

Step 5

  • Using PH0 Phillips Driver, remove the 4 Screws in the Metal part.

Using PH0 Phillips Driver, remove the 4 Screws in the Metal part.

Step 6

  • Using a plastic Spudger remove the battery connector.

Using a plastic Spudger remove the battery connector.

Step 7

  • Using PH0 Phillips Driver, remove the 12 Screws in the cover.

Using PH0 Phillips Driver, remove the 12 Screws in the cover.

Step 8

  • Place a metal Spudger between the tablet and the back cover.

Place a metal Spudger between the tablet and the back cover.

Step 9

  • Move the spudger around the tablet to release the clips attached to the tablet.

Move the spudger around the tablet to release the clips attached to the tablet.

Step 10

  • Use a plastic spudger to release the connection between the speakers and the motherboard as shown in the picture.

Use a plastic spudger to release the connection between the speakers and the motherboard as shown in the picture.

Step 11

  • Using a metal spudger to remove the top plug connector from the motherboard.

Using a metal spudger to remove the top plug connector from the motherboard.

Step 12

  • Use a metal spudger to remove both screen cable connectors.

Use a metal spudger to remove both screen cable connectors.

Step 13

  • use openning tools to remove the motherboard.

use openning tools to remove the motherboard.

Step 14

  • Remove the motherboard cover to reach in the screen display.

Remove the motherboard cover to reach in the screen display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    James Napoleon

Member since: 10/05/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team 1-6, Cagle Fall 2016                        

                                                  Member of USF Tampa, Team 1-6, Cagle Fall 2016 



                    USFT-CAGLE-F16S1G6                     


                                            3 Members                     


                                            5 Guides authored