Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

1

  • VENSTAR Taco Disassembly
  • 5 steps

Flags

0

  • BackVENSTAR Taco

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              VENSTAR Taco Disassembly
  • Starting with the Taco on its side, use the plastic opening tool to pop off the outer casing near the base.
  • The base labeled “VENSTAR TACO” is glued. Be careful separating the two sides of the device.

Starting with the Taco on its side, use the plastic opening tool to pop off the outer casing near the base.

The base labeled “VENSTAR TACO” is glued. Be careful separating the two sides of the device.

1024

Step 2

  • Repeat the previous step on the opposite side to remove the other outer casing.

Repeat the previous step on the opposite side to remove the other outer casing.

Step 3

  • Using a Phillips PH0 3 mm-bit screwdriver, remove the six screws on the inner layer of the Taco.
  • The screws are small and can get stuck. Use tweezers to pull them out if you are having trouble.

Using a Phillips PH0 3 mm-bit screwdriver, remove the six screws on the inner layer of the Taco.

The screws are small and can get stuck. Use tweezers to pull them out if you are having trouble.

Step 4

  • From the same side you just unscrewed, use a plastic opening tool to unwedge the inner cover on both sides of the base.

From the same side you just unscrewed, use a plastic opening tool to unwedge the inner cover on both sides of the base.

Step 5

  • Slide off the inner cover. It pulls apart and is held on by a small amount of glue.

Slide off the inner cover. It pulls apart and is held on by a small amount of glue.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Michael Thompson

Member since: 01/31/2016

194 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       University of Kentucky Louisville, Team 1-3, Matravers Spring 2016                        

                                                  Member of University of Kentucky Louisville, Team 1-3, Matravers Spring 2016 



                    LOUISVILLE-MATRAVERS-S16S1G3                     


                                            4 Members                     


                                            5 Guides authored