Difficulty
Easy
Steps
7
Time Required
3 minutes
Sections
2
- Back Cover
- 4 steps
- WiFi Module
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackVerizon Ellipsis 10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Open the SD/SIM card cover to start prying off the back cover.
Open the SD/SIM card cover to start prying off the back cover.
1024
Step 2
- Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.
Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.
Step 3
- Follow along the edge of the device to undo all of the retaining clips.
Follow along the edge of the device to undo all of the retaining clips.
Step 4
- Once all the clips are undone, the back panel should come off with little effort.
Once all the clips are undone, the back panel should come off with little effort.
Step 5
WiFi Module
- Locate WiFi module in bottom right-hand corner.
Locate WiFi module in bottom right-hand corner.
Step 6
- Unscrew the M1.5 screw using a Phillips #00 screwdriver.
Unscrew the M1.5 screw using a Phillips #00 screwdriver.
Step 7
- Using a pair of tweezers or needle nose pliers, pull up the connecting wire.
- Lift the module out.
Using a pair of tweezers or needle nose pliers, pull up the connecting wire.
Lift the module out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Mary Duran
Member since: 04/03/2019
597 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
Oregon Institute of Technology, Team S2-G10, Lancaster Spring 2019
Member of Oregon Institute of Technology, Team S2-G10, Lancaster Spring 2019
OIT-LANCASTER-S19S2G10
4 Members
7 Guides authored
