Verizon Ellipsis 8 Battery Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 minutes            

Sections

1

• Battery
• 4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackVerizon Ellipsis 8

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Using a plastic opening tool, slowly pry along the seam running along the edge of the device until the back case snaps free.
• Remove the back case.

Using a plastic opening tool, slowly pry along the seam running along the edge of the device until the back case snaps free.

Remove the back case.

1024

Step 2

• Using a Phillips #00 screwdriver, remove the two 0.1 mm screws on the green bracket.

Using a Phillips #00 screwdriver, remove the two 0.1 mm screws on the green bracket.

Step 3

• Once you remove the backing of the Verizon Ellipsis 8, gently use the spudger to lift one side of the tape. Once you have lifted the tape, slowly remove it until it is completely off the battery.

Once you remove the backing of the Verizon Ellipsis 8, gently use the spudger to lift one side of the tape. Once you have lifted the tape, slowly remove it until it is completely off the battery.

Step 4

• Lift and remove the battery from the device.

Lift and remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Jack                     

Member since: 02/06/2019

589 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UC Davis, Team S18-G6, Lore Winter 2019                        

                                                  Member of UC Davis, Team S18-G6, Lore Winter 2019 



                    UCD-LORE-W19S18G6                     


                                            3 Members                     


                                            3 Guides authored                     

Siegfried Harrison Ph.D. - Feb 7, 2020

Reply

Thanks! Easy to follow because of the pictures.

James V Redding - Feb 18, 2022

Reply

These instructions do not apply to the Verizon Ellipsis 8, QTASUN1. The G3 LTE unit requires that you remove the top end that covers the camera lens by popping the edge fasteners along the seam across the back with the spudger, carefully and then sliding the end (that covers the camera lens) off the top of the tablet. At that point three tiny Allen screws will become exposed. Remove the tiny screws and put them on a piece of tape! Make sure the micro memory card and sim card are removed! Using the spudger ( or a very thin knife edge) pop the bottom covering snaps backwards until you can slide the back downward to expose the battery. At that point it is the same as the description for battery replacement. Be very careful about loosing the three tiny, tiny, tainy flat head allen screws that hold the back on the tablet. Take your time and be methodical. If an 80 year old can do it, so can you!