Difficulty

Moderate

Steps

18

Time Required

                          30 - 40 minutes

Sections

1

  • Digitizer / Front Screen
  • 18 steps

Flags

0

  • BackVisual Land Prestige Elite 7Q

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Digitizer / Front Screen
  • At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.

At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.

1024

Step 2

  • Wedge a plastic opening tool into the edges of the tablet to pry it open.

Wedge a plastic opening tool into the edges of the tablet to pry it open.

Step 3

  • Wedge a curved metal spudger under the speaker in order to remove it.
  • The speaker is held in place by an adhesive and can be difficult to remove.

Wedge a curved metal spudger under the speaker in order to remove it.

The speaker is held in place by an adhesive and can be difficult to remove.

Step 4

  • Use a Phillips #000 screwdriver to remove the two 3.6mm screws.

Use a Phillips #000 screwdriver to remove the two 3.6mm screws.

Step 5

  • Use a plastic opening tool to lift the black tab.

Use a plastic opening tool to lift the black tab.

Step 6

  • Carefully lift and remove the ribbon cable from the black tab.

Carefully lift and remove the ribbon cable from the black tab.

Step 7

  • Use a plastic opening tool to remove the camera.

Use a plastic opening tool to remove the camera.

Step 8

  • Use a Phillips #000 screwdriver to remove the 3.6mm screw.

Use a Phillips #000 screwdriver to remove the 3.6mm screw.

Step 9

  • Lift the tape holding down the battery.

Lift the tape holding down the battery.

Step 10

  • Wedge a plastic card underneath the battery to remove it.

Wedge a plastic card underneath the battery to remove it.

Step 11

Step 12

Step 13

Step 14

  • Safely remove the battery and motherboard from the tablet.

Safely remove the battery and motherboard from the tablet.

Step 15

  • Lift the tape on the sides.

Lift the tape on the sides.

Step 16

  • Use a Phillips #000 screwdriver to remove the three 2.5mm screws.

Use a Phillips #000 screwdriver to remove the three 2.5mm screws.

Step 17

  • Wedge a metal spudger underneath the LCD screen to remove it.

Wedge a metal spudger underneath the LCD screen to remove it.

Step 18

  • Replace the front screen to replace the digitizer.

Replace the front screen to replace the digitizer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Sabrina Scholten

Member since: 09/22/2016

621 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UC Davis, Team 2-1, Oliver Fall 2016                        

                                                  Member of UC Davis, Team 2-1, Oliver Fall 2016 



                    UCD-OLIVER-F16S2G1                     


                                            5 Members                     


                                            12 Guides authored