Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
1
- Front Camera
- 6 steps
Flags
0
BackVisual Land Prestige Elite 7Q
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Camera
- At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
1024
Step 2
- Wedge a plastic opening tool into the edges of the tablet to pry it open.
Wedge a plastic opening tool into the edges of the tablet to pry it open.
Step 3
- Use a plastic opening tool to lift the black tab holding down the ribbon cable.
Use a plastic opening tool to lift the black tab holding down the ribbon cable.
Step 4
- Carefully use your finger to pull out the ribbon cable.
Carefully use your finger to pull out the ribbon cable.
Step 5
- Use a plastic opening tool to pull out the camera with the foam backing.
Use a plastic opening tool to pull out the camera with the foam backing.
Step 6
- Remove the camera from the foam backing.
- Replace the camera.
Remove the camera from the foam backing.
Replace the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Sabrina Scholten
Member since: 09/22/2016
621 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
UC Davis, Team 2-1, Oliver Fall 2016
Member of UC Davis, Team 2-1, Oliver Fall 2016
UCD-OLIVER-F16S2G1
5 Members
12 Guides authored