Visual Land Prestige Pro 7D Speaker Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          10 - 15 minutes

Sections

Back Panel
2 steps
Speaker
2 steps

Flags

BackVisual Land Prestige Pro 7D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Unscrew the two 4.0mm Phillips head screws found near the ports at the bottom of the device using a PH #00 screwdriver.

Unscrew the two 4.0mm Phillips head screws found near the ports at the bottom of the device using a PH #00 screwdriver.

1024

Step 2

Be careful when taking the back panel off. The speaker is connected to both the front and back panels, and may get pulled out if you are not gentle when lifting the back panel away.
Slide the plastic prying tool in between the front and back panel and pry them apart on all 4 sides.
It may be easiest to start on one of the sides, and work your way around the device. The bottom, with the ports, is the most difficult side and can be saved for last.
There are small latches that make this difficult. Moderate force may be required to separate the two panels.

Be careful when taking the back panel off. The speaker is connected to both the front and back panels, and may get pulled out if you are not gentle when lifting the back panel away.

Slide the plastic prying tool in between the front and back panel and pry them apart on all 4 sides.

It may be easiest to start on one of the sides, and work your way around the device. The bottom, with the ports, is the most difficult side and can be saved for last.

There are small latches that make this difficult. Moderate force may be required to separate the two panels.

Step 3

              Speaker

Gently lift the speaker off of the back panel.

Gently lift the speaker off of the back panel.

Step 4

Soldering guns are hot and can easily damage the device.
Desolder the two connection points at the black and red wires.
A helpful guide for desoldering can be found here How To Solder and Desolder Connections.

Soldering guns are hot and can easily damage the device.

Desolder the two connection points at the black and red wires.

A helpful guide for desoldering can be found here How To Solder and Desolder Connections.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Jennifer Laybourn

Member since: 10/14/2014

353 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 10-41, Amido Fall 2014                        

                                                  Member of Cal Poly, Team 10-41, Amido Fall 2014 



                    CPSU-AMIDO-F14S10G41                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team