Difficulty
Moderate
Steps
4
Time Required
5 - 15 minutes
Sections
1
- Micro-USB Port
- 4 steps
Flags
0
BackVizio SmartCast Tablet Remote XR6M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Micro-USB Port
- Follow Step 1 on Battery Replacement Guide to remove the back panel of the device.
Follow Step 1 on Battery Replacement Guide to remove the back panel of the device.
1024
Step 2
- Insert the tip of the nylon spudger under the black flap, and pull upwards toward yourself to disconnect it.
- Be careful, as the flap can easily break off.
Insert the tip of the nylon spudger under the black flap, and pull upwards toward yourself to disconnect it.
Be careful, as the flap can easily break off.
Step 3
- Using the T-5 bit, unscrew the three 5mm screws, two attached to the green board, one attached to the black board.
Using the T-5 bit, unscrew the three 5mm screws, two attached to the green board, one attached to the black board.
Step 4
- Using the nylon spudger, remove the silver cylindrical component followed by the green then black components
- Be careful not to break the wires that are holding the three components together.
Using the nylon spudger, remove the silver cylindrical component followed by the green then black components
Be careful not to break the wires that are holding the three components together.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
tate campbell
Member since: 09/17/2018
439 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
Washington State, Team S2-G3, Hope Fall 2018
Member of Washington State, Team S2-G3, Hope Fall 2018
WSU-HOPE-F18S2G3
4 Members
3 Guides authored