Difficulty
Moderate
Steps
8
Time Required
7 minutes
Sections
3
- Battery
- 4 steps
- Circuit Board
- 3 steps
- Screen
- 1 step
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
BackVTech CS6719-2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Push down on the battery cover in the direction of the arrow located on the back of the phone.
Push down on the battery cover in the direction of the arrow located on the back of the phone.
1024
Step 2
- Pull the battery cover off of the back of the phone.
Pull the battery cover off of the back of the phone.
Step 3
- Unplug the battery input cable.
Unplug the battery input cable.
Step 4
- Lift the battery out of the back of the phone.
Lift the battery out of the back of the phone.
Step 5
Circuit Board
- Remove the two 9mm screws on the back side with a Phillips #0 screwdriver.
Remove the two 9mm screws on the back side with a Phillips #0 screwdriver.
Step 6
- Use the plastic opening tool and spudger to pry the back side of the phone off.
Use the plastic opening tool and spudger to pry the back side of the phone off.
Step 7
- Remove the two 9mm screws located inside the back cover at the top.
Remove the two 9mm screws located inside the back cover at the top.
Step 8
Screen
- Remove the plastic screen.
Remove the plastic screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Joshua Woodward
Member since: 02/08/2016
122 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
IUPUI, Team 1-4, Baechle Spring 2016
Member of IUPUI, Team 1-4, Baechle Spring 2016
IUPUI-BAECHLE-S16S1G4
4 Members
16 Guides authored
