Difficulty

Moderate

Steps

10

Time Required

                          15 minutes

Sections

3

  • Front Case
  • 4 steps
  • Motherboard
  • 4 steps
  • Speaker
  • 2 steps

Flags

0

  • BackVTech Kidizoom Camera Connect

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Case
  • Remove batteries and SD card before beginning disassembly!
  • Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.

Remove batteries and SD card before beginning disassembly!

Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.

1024

Step 2

  • Remove all four (11mm) screws with the Philips #0 screwdriver.

Remove all four (11mm) screws with the Philips #0 screwdriver.

Step 3

  • Remove the two battery cartridges located on the underside of the camera.
  • Once cartridges are removed, use the metal spudger to pry open the top, bottom, and both sides of the camera.

Remove the two battery cartridges located on the underside of the camera.

Once cartridges are removed, use the metal spudger to pry open the top, bottom, and both sides of the camera.

Step 4

  • Beware of the two black viewfinder lens falling out as you pry open the device!
  • The device should now be open and ready for further repair and/or replacement parts.

Beware of the two black viewfinder lens falling out as you pry open the device!

The device should now be open and ready for further repair and/or replacement parts.

Step 5

              Motherboard
  • Locate and remove the screws circled in the provided image with a Philips #0 screwdriver.

Locate and remove the screws circled in the provided image with a Philips #0 screwdriver.

Step 6

  • Unsolder the connection points on the motherboard.

Unsolder the connection points on the motherboard.

Step 7

  • Unsolder the connections to the right battery terminal. Removing the terminal allows easier access to the motherboard.

Unsolder the connections to the right battery terminal. Removing the terminal allows easier access to the motherboard.

Step 8

  • Carefully pull up on the motherboard and pink plastic underneath the motherboard. The pink plastic contains the display and is connected to the motherboard.

Carefully pull up on the motherboard and pink plastic underneath the motherboard. The pink plastic contains the display and is connected to the motherboard.

Step 9

              Speaker
  • The speaker is glued in so you must use the metal spudger to break the seal made by the glue.

The speaker is glued in so you must use the metal spudger to break the seal made by the glue.

Step 10

  • Once the seal is broken the speaker should move freely. Carefully lift and remove the speaker along with its attached red and black wires.

Once the seal is broken the speaker should move freely. Carefully lift and remove the speaker along with its attached red and black wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Justin Sanchez

Member since: 02/08/2016

493 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 6-4, Eyestone Spring 2016                        

                                                  Member of USF Tampa, Team 6-4, Eyestone Spring 2016 



                    USFT-EYESTONE-S16S6G4                     


                                            4 Members                     


                                            5 Guides authored