Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Buttons
- 5 steps
Flags
3
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Better Introduction
Improve this guide by completing or revising its introduction.
BackVTech Safe And Sound DM221
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Buttons
- Remove the battery cover by sliding it down.
Remove the battery cover by sliding it down.
1024
Step 2
- Firmly grasp the battery and pull to disconnect the battery from its connector.
Firmly grasp the battery and pull to disconnect the battery from its connector.
Step 3
- Using a Phillips #00 screwdriver, unscrew the two 5.0 mm screws located at the bottom of the monitor inside of the device.
Using a Phillips #00 screwdriver, unscrew the two 5.0 mm screws located at the bottom of the monitor inside of the device.
Step 4
- Using a plastic opening tool, pry apart the front part of the device from the back. There are many access points, but the best spot to insert the spudger is around the “TALK” button.
- Avoid using the metal spudger. When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
Using a plastic opening tool, pry apart the front part of the device from the back. There are many access points, but the best spot to insert the spudger is around the “TALK” button.
Avoid using the metal spudger. When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
Step 5
- Remove the buttons from the front part of the device.
- Tip: The buttons on the front of the device (“POWER,” “SELECT,” “MENU,” “VOLUME”) are all connected as one unit. Pull them out carefully.
Remove the buttons from the front part of the device.
Tip: The buttons on the front of the device (“POWER,” “SELECT,” “MENU,” “VOLUME”) are all connected as one unit. Pull them out carefully.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Krystal
Member since: 10/01/2015
567 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 1-5, Leahy Fall 2015
Member of USF Tampa, Team 1-5, Leahy Fall 2015
USFT-LEAHY-F15S1G5
4 Members
5 Guides authored