Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Metal Razor Arms
  • 5 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackWahl Lithium Ion Trimmer

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Blades can be damaged by being dropped, misused, or not being properly taken care of. In any of these circumstances, a replacement is typically required.

Because the blades are sharp, make sure to wear gloves or some sort of hand protection while handling the blades in order to avoid any sort of injury.

Before beginning this guide, make sure that the Wahl Lithium Ion Trimmer is powered off and disconnected from any source of electricity.

What you need

Step 1

              Metal Razor Arms
  • Examine the razor to identify any broken or jammed blades that require replacement. If any such blades are identified, the whole set must be changed.

Examine the razor to identify any broken or jammed blades that require replacement. If any such blades are identified, the whole set must be changed.

1024

Step 2

  • Unscrew the two Phillips screws that hold the blades in place with a Phillips #0 screwdriver.

Unscrew the two Phillips screws that hold the blades in place with a Phillips #0 screwdriver.

Step 3

  • Apply pressure to the back side of the blades while pushing outward to remove the blade head completely from the Wahl Lithium Ion Trimmer.

Apply pressure to the back side of the blades while pushing outward to remove the blade head completely from the Wahl Lithium Ion Trimmer.

Step 4

  • Remove the metal clip using a Phillips #0 screwdriver.

Remove the metal clip using a Phillips #0 screwdriver.

Step 5

  • Separate the Wahl Lithium Ion Trimmer head into its four components. Remove the damaged blade and replace it with a new one.

Separate the Wahl Lithium Ion Trimmer head into its four components. Remove the damaged blade and replace it with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    nathan

Member since: 10/22/2013

1,395 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       University of Maryland, Team 1-3, Shastany Fall 2013                        

                                                  Member of University of Maryland, Team 1-3, Shastany Fall 2013 



                    UMD-SHASTANY-F13S1G3                     


                                            3 Members                     


                                            6 Guides authored

Sam - Mar 11, 2017

Reply

Where can I get replacement arms?

tinkrmann - Sep 16, 2017

Reply

Where can one obtain a new spring???

Mark Wilson - Aug 24, 2019

Reply

The spring popped out of the head, but your pictures are too blurry to see how it goes back together.