Wahl Professional Designer Motor Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          10 minutes            

Sections

1

• Motor
• 4 steps

Flags

0

• BackWahl Professional Designer

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motor               

• Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

1024

Step 2

• Remove the wires connected to the motor by firmly grasping both sides of a wire and wiggling until it is released.

Remove the wires connected to the motor by firmly grasping both sides of a wire and wiggling until it is released.

Step 3

• Unscrew the two 20.5 mm Phillip head screw located on the motor using a Phillip’s #1 screwdriver.

Unscrew the two 20.5 mm Phillip head screw located on the motor using a Phillip’s #1 screwdriver.

Step 4

• Gently remove the motor from the device.

Gently remove the motor from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Sophia Swearengin                     

Member since: 09/26/2017

694 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S14-G5, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S14-G5, Boczar Fall 2017 



                    USFT-BOCZAR-F17S14G5                     


                                            2 Members                     


                                            5 Guides authored