Wahl Professional Designer Power Cord Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 minutes            

Sections

1

• Power Cord
• 6 steps

Flags

0

• BackWahl Professional Designer

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Cord               

• Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

1024

Step 2

• Remove the cover from the device.

Remove the cover from the device.

Step 3

• Unscrew the black 5.556 mm Phillip head screw on the power switch, closest to the power cord with a Phillips #0 Screwdriver.

Unscrew the black 5.556 mm Phillip head screw on the power switch, closest to the power cord with a Phillips #0 Screwdriver.

Step 4

• Gently remove the black wire connected to the black screw.

Gently remove the black wire connected to the black screw.

Step 5

• Remove the white wire connected to the power cord and the motor by grabbing the white wire firmly on both sides near the motor mounting and wiggling until release.

Remove the white wire connected to the power cord and the motor by grabbing the white wire firmly on both sides near the motor mounting and wiggling until release.

Step 6

• Remove the power cord from its mount at the bottom of the device.

Remove the power cord from its mount at the bottom of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Sophia Swearengin                     

Member since: 09/26/2017

694 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S14-G5, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S14-G5, Boczar Fall 2017 



                    USFT-BOCZAR-F17S14G5                     


                                            2 Members                     


                                            5 Guides authored