Water Tank Sealing Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Jura Impressa Type C E F opening procedure
2 steps
Water Tank Sealing
2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackJura Impressa models C E F repairs
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Jura Impressa Type C E F opening procedure

The instructions are suitable for nearly every model of Jura and similar ones e.g. AEG and Krups.
Unplug!
Remove the water reservoir.

The instructions are suitable for nearly every model of Jura and similar ones e.g. AEG and Krups.

Unplug!

Remove the water reservoir.

1024

Step 2

On the rear side is an obstacle: four “oval head screws” looking like rivets. You can remove them using a special oval drive bit. They are sold at iFixit with the tool kits as well as some Jura suppliers or somewhere in the internet. Jura wants to keep us out of our own machines!
Using an oval head bit you can screw them out. If you haven´t got one you can carefully use pliers. It is a good idea to later change the screws for normal ones.
Beneath both top side covers are two Torx T15 screws. Remove those. Now lift off the whole top cover. Sometimes it jams and you have to use a bit of force.
The side covers must be pushed backwards by about 1 cm. Sometimes this is a little bit difficult to move. If necessary, wedge a plastic opening tool into the gap between the side covers and the front panel. The rear cover can be easily removed.

On the rear side is an obstacle: four “oval head screws” looking like rivets. You can remove them using a special oval drive bit. They are sold at iFixit with the tool kits as well as some Jura suppliers or somewhere in the internet. Jura wants to keep us out of our own machines!

Using an oval head bit you can screw them out. If you haven´t got one you can carefully use pliers. It is a good idea to later change the screws for normal ones.

Beneath both top side covers are two Torx T15 screws. Remove those. Now lift off the whole top cover. Sometimes it jams and you have to use a bit of force.

The side covers must be pushed backwards by about 1 cm. Sometimes this is a little bit difficult to move. If necessary, wedge a plastic opening tool into the gap between the side covers and the front panel. The rear cover can be easily removed.

Step 3

              Lift support

The support of the sealing is secured by a screw, mostly Tx 15.
On the left and right side are notches, open them and raise the support.
Turn it upside down.

The support of the sealing is secured by a screw, mostly Tx 15.

On the left and right side are notches, open them and raise the support.

Turn it upside down.

Step 4

              Replace sealing

Press both plastic rivets with tiers, then push them out. The cover of the sealing is free.
Change sealings. The old one was black, the new one red.
Attach cover

Press both plastic rivets with tiers, then push them out. The cover of the sealing is free.

Change sealings. The old one was black, the new one red.

Attach cover

Now follow the steps in reverse direction.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             


        VauWeh is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

VauWeh

Author

                                      with 1 other contributor

                    VauWeh

Member since: 10/19/2015

160,441 Reputation

                                      210 Guides authored                  



                       Badges:
                       41







                                                        +38 more badges

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

#

Member-Contributed Guide

Introduction

What you need