Difficulty

Easy

Steps

8

Time Required

                          10 - 25 minutes

Sections

1

  • Battery
  • 8 steps

Flags

0

  • BackHousehold

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

  • Your electronic lock flashes red.Your keypad doesn’t light up.If you have a home security provider, they’ll probably let you know!

In this guide, you will learn how to change the batteries of your Weiser Smartcode 10 Touchscreen Electronic Lock.

(Try saying that ten times fast!)

Before starting this guide, make sure all home security connected to the door lock is disarmed. Let’s begin!

What you need

Step 1

              Battery
  • Unlock your door and open it.
  • Make sure the bolt/latch is fully inside the door before you continue.

Unlock your door and open it.

Make sure the bolt/latch is fully inside the door before you continue.

1024

Step 2

  • Using the Phillips #1 screwdriver, remove the three 8 mm screws on the left, right and bottom side of the cover.

Using the Phillips #1 screwdriver, remove the three 8 mm screws on the left, right and bottom side of the cover.

Step 3

  • Take the exterior cover off the door lock.

Take the exterior cover off the door lock.

Step 4

  • Find the battery pack (marked “DOOR” in between two arrows) at the top of the lock.

Find the battery pack (marked “DOOR” in between two arrows) at the top of the lock.

Step 5

  • Slide the battery pack upwards.
  • Turn the pack over to reveal the batteries. Replace the batteries.

Slide the battery pack upwards.

Turn the pack over to reveal the batteries. Replace the batteries.

Step 6

  • Reinsert the battery pack with the word “DOOR” facing you.
  • Wait until you see a green LED light flashing and/or hear two beeps to indicate working batteries.
  • If there is no green light, repeat steps 5 and 6. Check to see if the batteries are placed correctly or if newer batteries are required.

Reinsert the battery pack with the word “DOOR” facing you.

Wait until you see a green LED light flashing and/or hear two beeps to indicate working batteries.

If there is no green light, repeat steps 5 and 6. Check to see if the batteries are placed correctly or if newer batteries are required.

Step 7

  • Ensure that the bolt/latch is still inside the door.
  • Take the exterior cover and point the narrow end of the knob to the right. Place the cover on the lock and reinsert the screws.
  • Try not to fasten the screws too tightly as they could get damaged in the process.

Ensure that the bolt/latch is still inside the door.

Take the exterior cover and point the narrow end of the knob to the right. Place the cover on the lock and reinsert the screws.

Try not to fasten the screws too tightly as they could get damaged in the process.

Step 8

  • To confirm the finished repair, go to the front of the door and place the back of your hand on the touchscreen to activate the keypad.

To confirm the finished repair, go to the front of the door and place the back of your hand on the touchscreen to activate the keypad.

Congratulations! Make sure to redo this process each year to ensure your device continues to work!

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Brandon Brown

Member since: 05/15/2021

187 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       York University, Team S1-G7, Melo-Thaiss Summer 2021                        

                                                  Member of York University, Team S1-G7, Melo-Thaiss Summer 2021 



                    YORK-MELO-THAISS-SU21S1G7                     


                                            1 Member                     


                                            2 Guides authored