Difficulty
Easy
Steps
7
Time Required
6 - 10 minutes
Sections
2
- Front Panel
- 5 steps
- Power Switch
- 2 steps
Flags
0
BackWen 2307
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Panel
- Unscrew the locking sleeve.
Unscrew the locking sleeve.
1024
Step 2
- Remove the hanging clip.
Remove the hanging clip.
Step 3
- Unscrew the six 8mm PH2 screws.
Unscrew the six 8mm PH2 screws.
Step 4
- While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.
While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.
Step 5
- To remove the front panel, pry the device apart while holding the device with the other hand.
- The front panel should come out easily.
To remove the front panel, pry the device apart while holding the device with the other hand.
The front panel should come out easily.
Step 6
Power Switch
- Firmly grasp and lift out power switch.
Firmly grasp and lift out power switch.
Step 7
- Firmly grasp and disconnect cables.
- Make sure to mark your cable positions so you do not reverse them when putting back together.
Firmly grasp and disconnect cables.
Make sure to mark your cable positions so you do not reverse them when putting back together.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Joshua Bowery
Member since: 02/08/2016
549 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 12-1, Eyestone Spring 2016
Member of USF Tampa, Team 12-1, Eyestone Spring 2016
USFT-EYESTONE-S16S12G1
4 Members
6 Guides authored
