Difficulty

Easy

Steps

11

Time Required

                          25 minutes

Sections

2

  • Settings Knob
  • 2 steps
  • Plastic Casing
  • 9 steps

Flags

0

  • BackWexford CT-166TF

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Settings Knob
  • Locate the knob at the top of the fan.

Locate the knob at the top of the fan.

1024

Step 2

  • Remove the knob by gripping it and pulling straight up. Use a spudger if it is difficult to grip.
  • When reassembling, be sure to align the bottom of the new knob and the turning mechanism in the fan before pushing down.

Remove the knob by gripping it and pulling straight up. Use a spudger if it is difficult to grip.

When reassembling, be sure to align the bottom of the new knob and the turning mechanism in the fan before pushing down.

Step 3

              Plastic Casing
  • Using the plastic opening tool, turn the device over and remove the black plastic covers over the four screw holes.

Using the plastic opening tool, turn the device over and remove the black plastic covers over the four screw holes.

Step 4

  • Remove the four screws underneath the plastic covers.

Remove the four screws underneath the plastic covers.

Step 5

  • Remove 5 smaller screws visible through small holes between the base and the casing.

Remove 5 smaller screws visible through small holes between the base and the casing.

Step 6

  • Remove four screws on the back, two near the top and two near the bottom.

Remove four screws on the back, two near the top and two near the bottom.

Step 7

  • Pull off the back casing.

Pull off the back casing.

Step 8

  • Remove the 2 screws that attach the front part of the casing to the motor.

Remove the 2 screws that attach the front part of the casing to the motor.

Step 9

  • Remove the two middle screws attaching the black plastic cover to the front .

Remove the two middle screws attaching the black plastic cover to the front .

Step 10

  • Remove the two screws attached to the white bar near the red light on the top of the front casing.

Remove the two screws attached to the white bar near the red light on the top of the front casing.

Step 11

  • Remove the two screws keeping the button attached to the top of the casing.

Remove the two screws keeping the button attached to the top of the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Cameron Mattson

Member since: 04/05/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UW Tacoma, Team S3-G4, Liner Spring 2017                        

                                                  Member of UW Tacoma, Team S3-G4, Liner Spring 2017 



                    UWT-LINER-S17S3G4                     


                                            4 Members                     


                                            3 Guides authored